Image may differ from actual product and is for illustrative purposes only.Cable 2x0.5mm², round, black, flexible, unshieldedControl cable, 2-core, halogen-free, oil and acid-resistantprice per meter
Cable adapter cable for use with OPC-478UC/-1In addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Programming adapterIn addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Microphone extension cable (6.1 m) for HM-205RBFor use with rear microphone connection
Programming cable / PC to device (USB)In addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Power supply cable 3 mSpecifications:Cable length: 3 m, 9.8 ftConnection information: 2-pole
Shielded control cable (10 m)For connection between a radio (e.g. IC-M804) and an antenna tuner (e.g. AT-141)
COMMANDMIC™ extension cableExtension cable for remote control microphones. Is used between the radio and the OPC-1540 base connection cable of the CommandMic™.A maximum of two extension cables can be used.Technical data:Cable length: 6.1 m / 20 ftMaximum extension: two extensions
Programming adapter cableOPC-478UC/-1/UD is additionally requiredIn addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Handheld radio (14-pin connection) to handheld radio (14-pin connection)
15-pin accessory cableInputs/outputs for various signals such as AF output, modulation input*, etc.* For some series, including IC-F5330D/F5121D/F5122D/F5123D, only analog inputs can be used. A digital modulation input is not possible with this cable.Channel selection input can be configuredSpecifications:Cable length: 200 mmConnection information: 15-pin
Adapter cable for VOX function (for HS-94, -95, -97)Cable length: 110 mmNote: 2-pin, screwed type for HS-94/95/97 for VOX function
25-pin D-Sub accessory cableInputs/outputs for various signals such as AF output, modulation input*, etc. * For some transceivers, including the IC-F5330D/F5121D/F5122D/F5123D series, only one analog input is permitted. A digital modulation input is not permitted.A third-party GPS receiver can be connected directly via this cable. *GPS signals are only compatible with the digital transceivers such as IC-F5330D/F5121D/F5122D/F5123D.Specifications:Cable length: 360 mmConnection information: D-Sub 25-pin cable
1-pin/4-pin plug adapter cable; 2-pin microphone adapter with 2.5 mm and 3.5 mm socketsFor VOX operationTechnical data:Cable length 125 mm, 4.9 inPlug information: Φ2.5 mm/Φ3.5 mm stereo ⇔ Φ3.5 mm 4-pin
1-pin/4-pin plug adapter cable with 2.5 mm socketFor VOX operationTechnical data:Cable length: 125 mm, 4.9 in Connection information: Φ2.5 mm jack ⇔ Φ3.5 mm 4-pin
Adapter cable for use with OPC-478XX programming cableSpecifications:Cable length: 12.5 cm, 4.9 inConnection information: Φ2.5 mm/Φ3.5 mm stereo plug
Mobile transceiver connection cable (5 m); with modular and speaker jack plugSpecifications:Cable length: 5 m (16.4 ft)Connection information: modular rj45 plug and Φ3.5mm speaker plug
Headset adapter cable with PTT button / 2-pin type LSpecifications:Connection information: 2-pin type L
Cloning Cable (PC to device); 14-pin multi-connector to USBIn addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Programming cable (USB)In addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.
Programming cable (USB to microphone connection socket)In addition to the programming cable, software is required to configure the parameters. The software can be found in the accessories overview or the manual for the corresponding radio.