Adaptor 1 "x14 pipe thread to 1" BSP thread (ADT) (e.g. for CX-4) Side hole for the antenna cable. Height: 140 mm
380-520 MHz duplexerThis product is often used in combination a Repeater to be able to transmit and receive via just one antenna. 6-circuit duplex crossoverN-female connectorThis product is manufactured to customer order and cannot be canceled by the customer once ordered. This product cannot be returned.The duplex crossover must be configured and adjusted to your frequencies before use. FELLECS-TECH offers a chargeable service for this service. The illustration may differ from the actual product.
N-connector for Aircell 7Specifications:Type: N-connectorVersion: Plug (male)Cable type: Aircell 7
PL (UHF) plugwith screw capmade of brass with Teflon insulationFor soldering the inner conductorSpecifications:Maximum temperature: 165 °COhm: 50 ΩMaximum cable diameter: 7.3 mmLength of the plug: 34.3 mm
Procom MPX duplexer installation kit for Motorola SLR1000 repeaterSuitable for mounting PROCOM MPX 2/6 or PROCOM MPX 70/6Scope of delivery:Mounting plate incl. screws1x adapter N-plug to MCX2x cable N-connector to MCX (RX/TX)
430-470 MHz duplexerThis product is often used in combination with an SLR1000 to be able to transmit and receive via just one antenna. An additional installation kit is required for installation in an SLR1000; this can be found in the accessories overview.6-circuit duplex crossoverDuplex spacing: 9 - 13 MHzN-female connectorThis product is manufactured to customer order and cannot be canceled by the customer once ordered. This product cannot be returned.The duplex crossover must be configured and adjusted to your frequencies before use. FELLECS-TECH offers a chargeable service for this service. The illustration may differ from the actual product.
Stand off upper bracket, nylon, for antennas of 28mm, and 38mm dia
Mounting kit - heavy-dutycontains the 81-S bracket and the 408-R upper bracketfor antennas with 25 mm, 28 mm and 38 mm diameter“1-14 thread
4-way ratchet toggle mount (nylon) with toggle lever, for deck or side mountingStandard thread 1" x 14 TPIQuick-release mechanism for rapid positioning of the antennaFor self-supporting antennas up to 2.40 m in length
Ratchet mount, stainless steel, cable slot. HD Version is now Standard! Improved strength to extra Heavy Duty.4-way tilt bracket (stainless steel)Standard thread 1” x 14 TPIQuick-release mechanism for fast placement of the antennaCentral inletRobust construction, high quality coating
Stainless steel ratchet tilt bracket for railing mountingCable slotQuick-release mechanism for rapid lowering of the antennaFor 25 mm and 38 mm thick vertical and horizontal railingsFor antennas up to 2.40 m in length (in self-supporting mode)
Stainless steel ratchet tilt bracketCable slotFor horizontal or angled railingsTilting lever for quick lowering of the antennaSuitable for 22 mm or 25 mm antennas up to 2.5 m
Stainless steel mount with fixed baseStandard thread 1” x 14 TPI10 cm height, base diameter: 7.5 cmIdeal for mounting on the equipment carrierVery suitable for GPS and marine TV antennas
Mast extension made of heavy-duty stainless steel with 1" x 14 pipe thread (male thread at the top, female thread at the bottom)ideal for positioning antennas above an obstacle"heavy duty" versionVariants of the product:Model 4700: 15 cm lengthModel 4700-1: 30 cm lengthModel 4700-2: 60 cm length
Mast extension made of heavy-duty stainless steel with 1" x 14 pipe thread (male thread at the top, female thread at the bottom)ideal for positioning antennas above an obstacle"heavy duty" versionVariants of the product:Model 4700: 15 cm lengthModel 4700-1: 30 cm lengthModel 4700-2: 60 cm length
Mast extension made of heavy-duty stainless steel with 1" x 14 pipe thread (male thread at the top, female thread at the bottom)ideal for positioning antennas above an obstacle"heavy duty" versionVariants of the product:Model 4700: 15 cm lengthModel 4700-1: 30 cm lengthModel 4700-2: 60 cm length